Choosing the Correct Running Cadence

800 533 Patrick McCrann

Understanding proper run cadence can seem like a daunting task, but it should never be overlooked. Correct run cadence will help you maintain good form. Good form reduces the change of injury, and running with good form for longer periods of time will increase your run speed.

So in all actuality, run cadence is extremely important.

Common knowledge holds that a cadence of 180-foot strikes per minute is optimal. To achieve this, your left and right feet each hit the ground 90 times in a minute.

But it’s not that simple.

There is no one-size-fits-all cadence for everybody. Everyone does have an optimal cadence based on their fitness and body. Finding that sweet spot is what’s important since not everyone will be able to reach 180 steps per minute.

The Speed Equation

Speed = Stride Length times Cadence

  • Stride length is the distance between each foot strike — left foot take off to right foot landing.
  • Cadence is the number of times your feet hit the ground in a minute.

If you keep the length fixed at a set distance, but increase the number of times you do that in a minute, you are faster.

If you keep the number of steps per minute fixed but increase the length of each stride, you are faster.

Of course, it’s not saying that you are trying to get faster by adjusting your cadence.

But that adjusting your cadence has implications on your actual speed and effort —  that can make this change a bit more challenging than anticipated.

Why Care About Your Cadence?

It’s not the final arbiter of speed or performance. However, it’s actually important for one reason.

You control your cadence. 

There are times in a run, or a race, where you want to improve your speed. “Run faster” isn’t always an option. But if you can focus on lifting your cadence, you will increase your speed.

If you see your cadence dropping in a long run or race, you’ll also know that your speed is faltering.

Know your cadence + Master your cadence = Improve your performance.

Measuring Your Cadence

The best way to measure your cadence is in real time with a device.

Older running watches have a foot pod, such as this Garmin Footpod, that would pair with your watch.

Newer setups have an accelerometer in the Heart Rate Strap (or watch itself). These systems measure cadence by tracking the change in your torso or arm position as you run (like the Garmin HR Run Monitor).

If the technology isn’t in your future, follow these steps to grab the information.

  • Count your steps against time on your watch. The counting interval is 15 seconds. As you are running, note the second time as you begin counting.
  • Count only one foot.  When you get to about 18, look again at your watch as you finish counting. When it gets to the 15-second mark, you’ll have your number.
  • Multiply that number by 4 to get your single foot cadence per minute.
  • Multiply that number by 2 to get your total cadence per minute.

So if you cover 22 steps in 15 seconds, that’s 88 steps per one foot per minute. Or 176 steps overall per minute.


Endurance Nation Now Has Training Plans for Runners!

UltraDistance | Marathon Plans | Half Marathon Plans | 10k Plans | 5k Plans

Running Plans Start at $47!


Establishing A Baseline Cadence

Before you go making a change, it’s important to know what your baseline is. Some runners are faster, some runners are slower…but few actually know their natural cadence. Here’s how you can do it.

Plan to check on every run at the 10-minute mark and midpoint of your run.

So for a 45-minute run, those two check-ins would be:

  • 10-minute mark
  • 22:30-minute mark

For a 90 minute run, those two check-ins would be:

  • 10-minute mark
  • 45-minute mark

Average the two numbers per run. So at the end of each run, take #1 and #2, add them up and divide by 2. That’s your average cadence for that run.

Write these down so you can review them at the end of the week.

At the end of the week, you add up all your cadences and divide by the total number of runs.

Example: If you have 8 runs this week, you will have eight separate cadence numbers. This looks like this: (21+20+20+22+19+21+23+22) / 8   That is 168 / 8.  Or an average cadence of 21…which is 84 for a single foot and 168 per minute.

Knowing Your Cadence Target

The first thing you’ll do is compare your average run cadence to 180 steps per minute. But that’s not always right. It’s also why we recommend you do this math AFTER you have measured your baseline. This way you won’t subconsciously run at your desired target cadence. Your fitness and height also affect your cadence.

Fitness-wise…The slower a runner you are, the less likely you will be able to hit 180. If your average run pace is slower than a 9:30-minute mile, you will likely struggle to hit 180 (it’s a lot of steps).

Height-wise… The taller you are, the longer your natural stride length will be. Anyone taller than 6′ 2″ will have a challenge with hitting 180 steps per minute.

How to Adjust?  Subtract 5 steps.

If you are out of shape, take five steps out for an initial target of 175. Then by height, take five steps away for every 3″ inch increment over 6′ 2.” So up until 6′ 5″ you are looking at 175 cadence. The next window is up to 6′ 8″ and you are closer to 170 cadence.

Incremental Change Program

Once you have your baseline and a good target, you can work to improve it.

Most runners have a lower cadence than their target. So your cadence might be 165, but you want to get closer to 180.

Don’t try to do it all at once. It will stress you out and frustrate you. Remember, it takes about 30 days to set a new habit in place.

So know that if you can run with your target cadence for a month, you should be free of having to think about it while you run.

Here are some incremental goals.

  • Week One: Focus on your target cadence for the first 5 minutes of every run. Then just run.
  • Week Two: Focus on your target cadence for the first 10 minutes, then just run.
  • Week Three: Focus on your target cadence for the first 15 minutes. Do a cadence check every 15 minutes thereafter. So a 45-minute run would be 15 minutes at cadence with checks at the 30- and 45-minute marks.
  • Week Four: Focus on your target cadence for the first 10 minutes, with cadence checks on a 10′-minute interval.

Long Run Check-Ins

Despite your best intentions, your cadence will drop when you run longer than an hour. It’s not your fault; it’s the combination of fatigue and your form breaking down.

But as a long distance runner, you have to fight the urge to settle when the going gets tough.

Once you hit the hour mark, you should plan on checking your cadence every mile. Use the auto-lap beep on your watch as a cue to check in and see how you are doing.

More advanced runners can insert time intervals at a different cadence late in key runs. For example, in a two-hour run, the last thirty minutes could have 6 x 2 minutes @ 180 rpms with 3′ of normal pace running.

So faster, better running by focusing on inputs (your cadence) vs outcomes (your pace).


Don’t get frustrated, trust the process. A little bit of math and configuring, in the beginning, will set the tone for continued success. If you use a training log platform like Final Surge, you can update your run journal accordingly, after every workout– leave some notes for yourself.

Endurance Nation is happy to help with any questions you have or help you tackle your next endurance goal.

Have questions? Feedback? Want help? Share your feedback in the comments below or let us help!

Leave a Reply

Your email address will not be published.